R$ 61.750,00
WORKING CAPACITIES — MH8C16-60T IRONWORKER
Working force: 60 T, with dual hydraulic cylinders.
Motor: 5,5 kW, three-phase (3F). Power supply: 380 V / 11,2 A or 220 V / 20,4 A.
The primary dimensions are in millimetres. Inch measurements follow the nominal values in the model table; conversions not specified in the table are approximate.
PUNCHING
• Hole up to Ø25 mm in 16 mm plate (Ø1 pol. in 5/8 pol. plate).
• Throat depth: 300 mm (approx. 11,81 pol.).
• Cylinder stroke: 80 mm (approx. 3,15 pol.); 12 to 20 strokes per minute.
PLATE CUTTING — SHEAR
• 16 × 250 mm (5/8 pol. × 250 mm) — thickness × cutting width.
• 8 × 400 mm (5/16 pol. × 400 mm) — thickness × cutting width.
• Cutting angle: 7°. Strength indicated in the shear table: up to 450 MPa.
ANGLE IRON CUTTING
• At 90°: 125 × 125 × 12 mm (5 × 5 × 1/2 pol.) — legs × thickness.
• At 45°: 50 × 50 × 5 mm (2 × 2 × 3/16 pol.) — legs × thickness.
NOTCHING — PIRANHA/TALÃO
• 60 × 100 × 8 mm (60 × 100 mm × 5/16 pol.) — width × length × thickness.
CAPACITIES WITH OPTIONAL TOOLS
• Round bar: Ø45 mm (Ø1 3/4 pol.).
• Square bar: 40 × 40 mm (approx. 1,57 × 1,57 pol.).
• T section at 90°: 125 × 125 × 12 mm (5 × 5 × 1/2 pol.).
• T section at 45°: 60 × 60 × 6 mm (2 3/8 × 2 3/8 × approx. 1/4 pol.).
• I section: 120 × 74 × 5 mm (4 3/4 × 3 × 3/16 pol.).
• U section: 120 × 135 × 6 mm (4 1/2 × 5 3/8 × 1/4 pol.).
• V bending: 10 × 300 mm (3/8 pol. × 300 mm) — thickness × width.
Check the configuration and optional tools for the intended application.
EQUIPMENT DESCRIPTION
The Multifunction Hydraulic Ironworker, used for punching and cutting metals, is the most economical, versatile and agile equipment for processing sheet metal, angle iron, sections, beams, flat bars, round bars and square bars. Its durable hydraulic cylinder and quick tool changes allow a wide variety of optional operations, such as bending, forming and making oblong and square holes, enabling numerous customizations to meet your needs. It optimizes time, labour and raw material and ensures greater accuracy and repeatability in holes and cuts. It is highly sought after in metalworking and also serves various building construction needs.
This machine offers high repeatability, easy handling and low maintenance. It is robust, with high wear resistance and an excellent finish. It is essential for those seeking to automate, speed up and ensure production with standardized, accurate and uniform quality. It offers high efficiency and economy.
Its independent dual-cylinder system allows two people to operate at the same time, one at the punching (stamping) station and the other at the cutting station, with independent controls.
A - HYDRAULIC CYLINDER
It allows countless applications, such as bending, drilling, stamping, deep drawing and cutting, by changing the punches or customized dies quickly and easily. Its robust construction and accuracy ensure exact part dimensions and an excellent finish on the final product.
B - SHEAR
With a complete cutting system in a single machine, it includes a shear for cutting sheet metal, flat bars and blanks.
C - ANGLE IRON SHEARING
Powerful shear for cutting angle iron at 45° and 90°, ideal for manufacturing frames and flanges.
D - CUTTING VARIOUS BARS AND SECTIONS (OPTIONAL)
Cutting system for round and square bars. It can be customized (optional) to cut C, U, I, T, Z, W and H sections simply by changing the cutting blades.
E - NOTCHING
It makes notches and cutouts in flat steel, angle iron, sections, etc.
The equipment turns raw material into a finished final product. Its simple and efficient control system ensures high processing speed and greater efficiency, with less waste of raw material and consumables such as cutting discs, drill bits and oils, as well as substantial labour savings, offering excellent value for money in the final product.
The quality of our equipment is guaranteed: we have 100% satisfaction among our customers throughout Brazil. We are committed to providing the best finish for your project and the satisfaction of working with equipment that automates one of your production processes. Please feel free to request a quote and find the solution for your needs. This equipment has manufacturing details that ensure performance, strength, stability and accuracy.
Working force: 60 T, with dual hydraulic cylinders.
Motor: 5,5 kW, three-phase (3F). Power supply: 380 V / 11,2 A or 220 V / 20,4 A.
The primary dimensions are in millimetres. Inch measurements follow the nominal values in the model table; conversions not specified in the table are approximate.
PUNCHING
• Hole up to Ø25 mm in 16 mm plate (Ø1 pol. in 5/8 pol. plate).
• Throat depth: 300 mm (approx. 11,81 pol.).
• Cylinder stroke: 80 mm (approx. 3,15 pol.); 12 to 20 strokes per minute.
PLATE CUTTING — SHEAR
• 16 × 250 mm (5/8 pol. × 250 mm) — thickness × cutting width.
• 8 × 400 mm (5/16 pol. × 400 mm) — thickness × cutting width.
• Cutting angle: 7°. Strength indicated in the shear table: up to 450 MPa.
ANGLE IRON CUTTING
• At 90°: 125 × 125 × 12 mm (5 × 5 × 1/2 pol.) — legs × thickness.
• At 45°: 50 × 50 × 5 mm (2 × 2 × 3/16 pol.) — legs × thickness.
NOTCHING — PIRANHA/TALÃO
• 60 × 100 × 8 mm (60 × 100 mm × 5/16 pol.) — width × length × thickness.
CAPACITIES WITH OPTIONAL TOOLS
• Round bar: Ø45 mm (Ø1 3/4 pol.).
• Square bar: 40 × 40 mm (approx. 1,57 × 1,57 pol.).
• T section at 90°: 125 × 125 × 12 mm (5 × 5 × 1/2 pol.).
• T section at 45°: 60 × 60 × 6 mm (2 3/8 × 2 3/8 × approx. 1/4 pol.).
• I section: 120 × 74 × 5 mm (4 3/4 × 3 × 3/16 pol.).
• U section: 120 × 135 × 6 mm (4 1/2 × 5 3/8 × 1/4 pol.).
• V bending: 10 × 300 mm (3/8 pol. × 300 mm) — thickness × width.
Check the configuration and optional tools for the intended application.
EQUIPMENT DESCRIPTION
The Multifunction Hydraulic Ironworker, used for punching and cutting metals, is the most economical, versatile and agile equipment for processing sheet metal, angle iron, sections, beams, flat bars, round bars and square bars. Its durable hydraulic cylinder and quick tool changes allow a wide variety of optional operations, such as bending, forming and making oblong and square holes, enabling numerous customizations to meet your needs. It optimizes time, labour and raw material and ensures greater accuracy and repeatability in holes and cuts. It is highly sought after in metalworking and also serves various building construction needs.
This machine offers high repeatability, easy handling and low maintenance. It is robust, with high wear resistance and an excellent finish. It is essential for those seeking to automate, speed up and ensure production with standardized, accurate and uniform quality. It offers high efficiency and economy.
Its independent dual-cylinder system allows two people to operate at the same time, one at the punching (stamping) station and the other at the cutting station, with independent controls.
A - HYDRAULIC CYLINDER
It allows countless applications, such as bending, drilling, stamping, deep drawing and cutting, by changing the punches or customized dies quickly and easily. Its robust construction and accuracy ensure exact part dimensions and an excellent finish on the final product.
B - SHEAR
With a complete cutting system in a single machine, it includes a shear for cutting sheet metal, flat bars and blanks.
C - ANGLE IRON SHEARING
Powerful shear for cutting angle iron at 45° and 90°, ideal for manufacturing frames and flanges.
D - CUTTING VARIOUS BARS AND SECTIONS (OPTIONAL)
Cutting system for round and square bars. It can be customized (optional) to cut C, U, I, T, Z, W and H sections simply by changing the cutting blades.
E - NOTCHING
It makes notches and cutouts in flat steel, angle iron, sections, etc.
The equipment turns raw material into a finished final product. Its simple and efficient control system ensures high processing speed and greater efficiency, with less waste of raw material and consumables such as cutting discs, drill bits and oils, as well as substantial labour savings, offering excellent value for money in the final product.
The quality of our equipment is guaranteed: we have 100% satisfaction among our customers throughout Brazil. We are committed to providing the best finish for your project and the satisfaction of working with equipment that automates one of your production processes. Please feel free to request a quote and find the solution for your needs. This equipment has manufacturing details that ensure performance, strength, stability and accuracy.
Especificações técnicas
- Working force: 60T
- Shear — thickness × width: 16 × 250 mm (5/8 pol. × 250 mm) or 8 × 400 mm (5/16 pol. × 400 mm)
- Motor power and supply: 5,5 kW — three-phase (3F); 380 V / 11,2 A or 220 V / 20,4 A
- Punching — hole × thickness: 25 × 16 mm (1 × 5/8 pol.); hole diameter Ø25 mm
- Throat depth: 300 mm (approx. 11,81 pol.)
- Cylinder stroke: 80 mm (approx. 3,15 pol.)
- Working rate: 12 to 20 strokes/min
- Angle iron at 90° — legs × thickness: 125 × 125 × 12 mm (5 × 5 × 1/2 pol.)
- Angle iron at 45° — legs × thickness: 50 × 50 × 5 mm (2 × 2 × 3/16 pol.)
- Notching — width × length × thickness: 60 × 100 × 8 mm (60 × 100 mm × 5/16 pol.)
- Shear — angle / indicated strength: 7° / up to 450 MPa
- Round bar — optional tool: Ø45 mm (Ø1 3/4 pol.)
- Square bar — optional tool: 40 × 40 mm (approx. 1,57 × 1,57 pol.)
- T section at 90° — optional tool: 125 × 125 × 12 mm (5 × 5 × 1/2 pol.)
- T section at 45° — optional tool: 60 × 60 × 6 mm (2 3/8 × 2 3/8 × approx. 1/4 pol.)
- I section — optional tool: 120 × 74 × 5 mm (4 3/4 × 3 × 3/16 pol.)
- U section — optional tool: 120 × 135 × 6 mm (4 1/2 × 5 3/8 × 1/4 pol.)
- V bending — optional tool: 10 × 300 mm (3/8 pol. × 300 mm) — thickness × width
- Units: Millimetres are the reference; nominal inches follow the table. Conversions not specified in the table are approximate.
Veja também
CG1C15
Cut & Shear
Cut & Shear
TDC/F flange clip cutter
Hydraulic TDC/F flange clip cutting with a stop and counter.